Ekvn-Yefolecv Roundhouse CBW, Day 4 (November 4, 2019)
Day four turned out to be a warm day after another night in the 30s. After a hot breakfast prepared by our hosts, who arose at 3:30 a.m. to have the food...
Nov 6, 2019
Ekvn-Yefolecv Roundhouse CBW, Days 2 & 3 (November 2&3, 2019)
Days 2 and 3 featured more hard work by our dedicated crew on this fast-moving project. Above, Don Hildebrand works on main post members. Rene Allen and Xavier Breuhler, one of the folks who...
Nov 5, 2019
Ekvn-Yefolecv Roundhouse CBW, Day 1 (November 1, 2019)
The next morning broke on a glorious day, though the sun had to get high before its warmth was sufficient to overcome the chill of the night before. Breakfast was a little...
Nov 4, 2019
Before the Build, Ekvn-Yefolecv Roundhouse CBW (October 31, 2019)
Note: The circumstances for this workshop are unusual for us. Typically, we celebrate the community that brings us in to help them build their community by building a timber frame. We have...
Nov 4, 2019
After the Sunrise Build: Thank You from the Guild
A Message from Workshop Manager Dale Emde Friends and colleagues, Before this workshop, if you had asked me how one should judge the success of a building project, I would have given you some...
Oct 24, 2019
Day 7, Sunrise Mill CBW (October 4, 2019)
The day of raising dawned cool and bright. The crew assembled on the sash mill deck for Dale's raising orientation. Dale reviewed the raising plan outline and addressed the specific safety issues...
Oct 8, 2019
Day 6, Sunrise Mill CBW (October 3, 2019)
Beautiful shot of the Sunrise Mill from across Swamp Creek. Unfortunately, the weather was not going to cooperate with our plan to begin the raising. The weather and the hardwood has taken its...
Oct 5, 2019
Day 5, Sunrise Mill CBW (October 2, 2019)
Day five began as a cool morning with a mist settled over the hills and our worksite. The setting, Pennypacker Mill, is surrounded by beautiful rolling Pennsylvania hills. Our site is quiet and...
Oct 4, 2019
Day 3, Sunrise Mill, September 30, 2019
Monday, September 30, was a warm, sunny day - much like a summer day - and we conducted as much of the workshop as we could under the cover of tents. Still,...
Oct 2, 2019
Day 2, Sunrise Mill, September 29, 2019
Cloud cover today allowed us to work out from under tents comfortably. Under Dale's watchful eye, Paige Heron and Brian Clark lower one of the large oak sill timbers using a chainfall...
Sep 30, 2019
Day 1, Sunrise Mill, September 28, 2019
Day one, participants assembling on Saturday morning for the orientation meeting out in front of the main lodge at Camp Hope in Schwenksville, PA. Our dining hall and food preparation facility at Camp...
Sep 30, 2019
The Work Goes On: Day Two at Lake Roesiger
Lake Roesiger Community Building Workshop continues, with "more of the same" - demonstrations, layout, camaraderie, and some beautiful scarf joints.
May 24, 2019
Orientation, Organization, Layout, and Fabrication: Day One at Lake Roesiger
Day One of the Lake Roesiger Community Building Workshops in Snohomish County, Washington.
May 23, 2019
The Stage is Set: Lake Roesiger Community Building Project
"Day Zero" at the Lake Roesiger Community Building Workshop (Snohomish County, Washington). Check out the facility and lead team preparing for this event!
May 21, 2019